Takahashi T-Mount DX-60W for Nikon

Product Overview

This Takahashi T-mount lets you put a Nikon body on a Takahashi telescope. It converts from a male wide mount thread to the Nikon lens mount, so the camera attaches to the telescope the same way a lens attaches to the camera — the telescope becomes the optic.

Who It's For

This is a good match if you shoot with a Nikon body and want to connect it to a Takahashi telescope or corrector that terminates in Takahashi's wide mount thread.

Key Features & Design

• Wide mount to Nikon F: male wide mount thread on the telescope side, Nikon bayonet on the camera side.
• Mechanical adapter only: no optical elements, and no electronic communication between camera and telescope.
• Takahashi-made: matched to Takahashi's own wide mount standard rather than a generic T-ring.

Recommended Uses

Prime-focus astrophotography with a Nikon DSLR on a Takahashi refractor or astrograph, usually behind a flattener, reducer or extender that presents the wide mount thread.

Compatibility and Accessory Notes

The telescope side is Takahashi's male wide mount thread — not the generic M42 T-thread, so a standard T-ring is not a substitute. The camera side is the Nikon F bayonet; Nikon Z mirrorless bodies need Nikon's FTZ adapter in addition. Takahashi also makes a DX-S version of the Nikon T-mount, and a Canon EOS version of this one. If you are working out a full imaging train and its back-focus, send us the camera, corrector and telescope and we will map it with you.

Good to Know Before You Order

Mechanical only: there is no electrical contact through this adapter, so the camera has no aperture or lens data. Shooting is in manual with the telescope as the lens, which is normal for prime-focus work.

Wide mount, not T-thread: this is Takahashi's own thread standard. If the part of your train facing the camera is M42 or M48, this is not the adapter — tell us what you have and we will identify the right one.

Two Nikon versions exist: the DX-60W here and the DX-S. They terminate differently on the telescope side; we stock both and can confirm which your train needs.

Frequently Asked Questions

Is it difficult to set up?

No — it threads onto the wide mount at one end and the camera clicks on at the other, exactly like mounting a lens.

Which cameras does it fit?

Nikon bodies with the F bayonet. Z-series bodies work with the FTZ adapter added.

Will autofocus or aperture control work?

No — it is a mechanical adapter with no electronic link. Focus is done at the telescope's focuser.

Can I use a standard T-ring instead?

Not on a wide mount thread. The wide mount is Takahashi's own standard and takes this adapter.

Bottom Line

The adapter that puts a Nikon body on Takahashi's wide mount thread — mechanical, direct, and matched to the Takahashi imaging train.