Player One T2-T2 Adapter

Overview

The Player One T2-T2 Adapter is a machined metal coupler with a T2 (M42×0.75) male thread on both ends. It joins two T2 female fittings together in an imaging train. It is a purely mechanical part with no glass and no electronics.

Who It's For

This is a good match if you need to connect two T2-threaded components — for example joining the Player One Phoenix Wheel to a camera or to a 1.25″-to-M42 rotolock.

Key Features & Design

• T2 male on both sides: M42×0.75 (T2) male threads at each end, with roughly 4 mm of thread engagement per side.
• Short coupler: a compact 2 mm body that joins two T2 female fittings.
• Metal construction: machined for a durable, repeatable thread fit.
• Fully mechanical: no optical elements and no electrical connection.

Recommended Uses

Player One lists it for the Phoenix Wheel — connecting the wheel to a camera or to a 1.25″-M42 rotolock — and it works anywhere two T2 female fittings need to be joined.

Compatibility & Accessory Notes

The adapter fits standard T2 / M42×0.75 threads. Both ends are male, so the mating components need T2 female threads. If you are not sure how it fits your camera and filter wheel, send us your setup and we will work it out with you.

Good to Know Before You Order

• Mechanical adapter only: it carries no optical elements and passes no electronic signal.
• Male on both sides: both ends are T2 male threads, so the mating components need T2 female threads.

Frequently Asked Questions

Is it difficult to set up?

No — it threads directly onto standard T2 fittings by hand and needs no tools or adjustment.

What is it best used for?

Joining two T2 female fittings — for example the Phoenix Wheel to a camera or a 1.25″-M42 rotolock.

Does it contain any optics?

No. It is a bare mechanical coupler with no lenses or coatings.

Bottom Line

In short: a compact metal T2 male-to-male coupler that joins two T2 female fittings, listed by Player One for connecting the Phoenix Wheel to a camera or rotolock.