Pegasus Astro USB 3.0 Type-A to Type-B Cable

Pegasus AstroSKU: USB3B-2PREM

Configuration: 2 m Premium
Price:
Sale price$26.00 CAD
Stock:
On Backorder — ships when available
  • Description
  • Specifications

Product Overview

This is the Pegasus Astro USB 3.0 Type-A to Type-B cable range, offered in six configurations covering premium shielded leads, metal-shell versions, and two-packs of shorter cables. Type-A to Type-B is the standard pairing for astronomy cameras, powerboxes and powered USB hubs, and these are built to be dependable in the one place a generic cable tends to fail — cold, damp, and being flexed by a moving mount.

Choose the configuration that matches the run you need. All six carry USB 3.0 SuperSpeed signalling at 5 Gbps.

Who It's For

This is a good match if you:

  • Connect a cooled CMOS camera, powerbox or USB hub that uses a Type-B socket.
  • Want short, tidy runs on the imaging train rather than coiling excess cable on the mount.
  • Need spares in the field — the 0.3 m and 0.5 m options ship as two-packs for exactly that.
  • Have had a cheap cable fail mid-session and want shielding and strain relief built for outdoor use.

Key Features & Design

  • USB 3.0 SuperSpeed: 5 Gbps throughput across every configuration, suitable for large-sensor downloads.
  • Type-A to Type-B: the standard astronomy camera and powerbox pairing.
  • Metal-shell options: the 1.0 m and 0.5 m metal versions add a machined connector housing for repeated plugging and unplugging.
  • Premium shielded options: the 1 m and 2 m premium leads use heavier shielding for longer runs near motors and dew heaters.
  • Two-packs at short lengths: 0.3 m and 0.5 m ship as pairs, which is the usual requirement when wiring a hub to two devices.
  • Backwards compatible: works with USB 2.0 devices at USB 2.0 speed.

Recommended Uses

  • Camera to powered USB hub on the telescope, using a short 0.3 m or 0.5 m lead.
  • Powerbox or hub to control PC over a 1 m or 2 m premium run.
  • Replacing a failed or intermittent cable in an existing observatory installation.
  • Field spares kit, where the two-packs are the practical choice.

Compatibility and Accessory Notes

  • Connector check: Type-B is the squarer connector used on most cooled astronomy cameras, Pegasus powerboxes and the USB Control Hub. Confirm your device is not Type-C or Micro-B before ordering.
  • Pairs with Pegasus powerboxes and the USB Control Hub, all of which accept Type-B upstream.
  • For runs beyond about 5 m, a passive cable becomes unreliable — the Pegasus active USB extension range covers 5 m, 15 m and 20 m instead.
  • Camera enumeration: some QHY and ZWO USB 3 cameras negotiate over USB 2.0 first. That is a camera behaviour, not a cable limitation, and these cables support it.

Good to Know Before You Order

  • Two of the six options are two-packs. The 0.3 m and 0.5 m black versions ship as pairs; the premium and metal options are single cables. The variant name states which.
  • These are passive cables. Above roughly 5 m you want an active extension — we stock those separately and are happy to advise on the right length.
  • Data only. USB bus power is carried, but your camera or controller still needs its own 12 V supply.
  • Metal shell versus premium is a housing difference, not a speed difference. Both run at 5 Gbps; the metal shell simply survives more insertion cycles.

Frequently Asked Questions

Is it difficult to set up?

No. It is a cable — Type-A to the computer or hub, Type-B to the device. No drivers, no configuration.

Which length should I choose?

Short 0.3 m or 0.5 m leads for camera-to-hub on the telescope; 1 m or 2 m premium for hub or powerbox back to the control PC. If the run is longer than about 5 m, use an active extension instead.

What is the difference between premium and metal shell?

Premium refers to heavier shielding; metal shell refers to the connector housing. Both are USB 3.0 at 5 Gbps.

Are the two-packs two identical cables?

Yes — two cables of the same length in one package.

Will these work with USB 2.0 devices?

Yes, at USB 2.0 speed.

Bottom Line

In short: dependable USB 3.0 Type-A to Type-B cables in six configurations, from 0.3 m two-packs for the imaging train up to 2 m premium runs. Pick the length for the job and, past about 5 m, move to an active extension.

Product typePassive USB data cable
USB standardUSB 3.0 SuperSpeed (5 Gbps)
ConnectorsUSB Type-A to USB Type-B
Configurations2 m Premium; 1 m Premium; 1.0 m Metal Shell; 0.5 m Metal Shell; 0.3 m Pack of 2; 0.5 m Pack of 2
Backwards compatibleYes - USB 2.0 devices operate at USB 2.0 speed
Weight1 lb per configuration
CompatibilityPegasus Astro powerboxes, USB Control Hub, USB Type-B astronomy cameras
Maximum practical runApprox. 5 m passive - use an active extension beyond this

You may also like

Recently viewed

Recent Blog Posts

View all
Guide scope or off-axis guider: a PHD2 guide graph reporting 0.41 arcsecond RMS beside elongated stars from the same night

Your Guide Graph Is Lying to You

astrophotography Stephen Mallia
You drove ninety minutes to dark sky, PHD2 held 0.4 arcseconds all night, and half your subs still have eggs for stars. Here are the three things your

Read More
V-size Vixen and D-size Losmandy dovetail bar profiles compared to scale, about 44 mm against 75 to 84 mm

D-Size vs V-Size: A Complete Guide to Telescope Dovetail Systems

Stephen Mallia
What's the difference between D-size and V-size telescope dovetails? Here's everything you need to know.

Read More
A 55 mm back focus imaging train: spacer 16.5 mm, filter drawer 21 mm and camera sensor depth 17.5 mm, measured from the rear of the reducer

What Is Back Focus in Astrophotography? Telescope Reducers, Flatteners, and Spacing Explained

Stephen Mallia
What Is Back Focus in Astrophotography? Telescope Reducers, Flatteners, and Spacing Explained Back focus is one of those astrophotography terms that c

Read More