SBIG AFW Filter Wheels

SBIG AFW Filter Wheels are ultra-thin wheels that minimize back focus distance.

The standard version, which accommodates filters ranging from 1 mm to 3 mm thick, uses only 0.55″ (14 mm) back focus.

The tall version, which accommodates 5 mm thick filters, uses only 0.65″ (16.5 mm) back focus.

Improved Filter Compatibility:

In order to accommodate the most popular filter sizes, convenient spacers are included:

• 3 mm filters – do not use spacer
• 2 mm filters – align notches in spacer with mounting screws
• 1 mm filters – flip over spacer so notches face the filter
• 5 mm filters – AFW-10-50ST only – adds tall spacers and mounting screws

Easy Installation:

The AFW series filter wheels are designed to be quickly installed onto the camera without removing the carousel or individual filters.  Removing a single access cover provides access to the filter slots and camera mounting screws.

Two mounting screws are “captive” under the carousel, and can be accessed by turning the carousel by hand to align access holes with the screw heads.  The two remaining screws are freely accessible.  This makes installation and removal quick and easy.

Once the wheel is attached to the camera, a single cable is connected to the camera’s AUX port. This single cable provides all necessary power and control functions.

Dual Wheel Support:

For those users requiring more filters, AFW series wheels include the ability to control two filter wheels. The filter wheels can be stacked using our AFW Dual Adapter. A matching three-port low profile cable is included to connect the two wheels to the camera’s control port.

Currently software support is available via an Aluma AC series camera and MaxIm LT or MaxIm DL Pro software.  Alternatively, the dual wheel can be controlled via our SBIG USB to Filter Wheel Adapter using its associated ASCOM driver.

The software allows you to configure “virtual” filter slots, that map to specific slots on wheel 1 and wheel 2.  Usually one slot is left blank in each wheel, allowing you to select filters from one wheel or the other.  It is also possible to arrange for two filters to be used per slot, depending on your requirements.

With one blank slot in each wheel, a pair of AFW-10-50SQ wheels allow you to use 18 filters.  Similarly a pair of AFW-12-50R wheels will allow you to use 22 filters, and a pair of AFW-16-36R wheels will allow you to use 30 filters.

StarChaser Autoguider and AO-X Compatibility:

AFW series wheels are compatible with StarChaser SC-3, providing self-guiding in front of the filters.  They also work with our popular AO-X Adaptive Optics unit, providing the tightest possible star images.

Camera Model Compatibility:

Please note that when smaller filters are used they may vignette larger sensors.  Compact models will require the AFW to Small Format Camera Adapter.  Some cameras will require an 11066 cable adapter.  Some older products are not electrically compatible and need to use the USB-FW adapter.

Additional compatibility notes:

STC-7 and STC-428-P:

The built-in filter wheel prevents the camera from controlling an external wheel.  Options are (a) to replace the built-in wheel with an STC-428-OEM front plate, or (b) stack the AFW on top and control the second wheel via a USB-FW adapter. The two wheels can be operated together using MaxIm DL’s Dual Filter Wheel feature.  ACC14 is required.

ST series: 

Not officially supported.  Requires an ACC14.  May work directly with camera but this is not guaranteed, as ST firmware is no longer under active support.  If there is an issue controlling the wheel than a USB-FW adapter will be required.

STL series:

Not officially supported.  The built-in filter wheel prevents the camera from controlling an external wheel. It is possible to attach an AFW wheel to the STL using the ACC10 STL to StarChaser Adapter and use a USB-FW to control it.  Since STL also has an internal filter wheel the combination is best supported using MaxIm DL’s Dual Filter Wheel feature.

SPECIFICATIONS: