{"product_id":"takahashi-camera-angle-adjuster-caa-s-sky90","title":"Takahashi Camera Angle Adjuster CAA-S (SKY90)","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThe Camera Angle Adjuster S rotates your camera to any framing angle and locks it there for the exposure, without breaking the imaging train apart to do it. It threads M55.9 × 0.75 — female to the telescope, male to the camera — consumes \u003cstrong\u003e12.3 mm\u003c\/strong\u003e of light path, measures 70.0 × 24.9 mm and weighs \u003cstrong\u003e110 g\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThis is the current \u003cstrong\u003eTKA21200N\u003c\/strong\u003e version, which Takahashi released in April 2023 as the successor to the camera rotator sold as CAA (SKY90). Takahashi treats the two as compatible and interchangeable.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eWho It's For\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThis is a good match if you image through a Takahashi with an M55.9 × 0.75 drawtube interface — the FS-60 and FC-76 families, the FCT-65D, or a SKY90 — and want to reframe a target by rotating the camera rather than by rebuilding the train behind it.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Design\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM55.9 × 0.75, female to the telescope and male to the camera:\u003c\/strong\u003e it drops into the M55.9 chain without changing the thread standard on either side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.3 mm light path:\u003c\/strong\u003e Takahashi's published figure, measured from the tip of the left ring to the base of the male thread on the right. The part's outer thickness is 20 mm and its overall length 24.9 mm — the 12.3 mm is what goes into a backfocus total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 g, 70.0 mm maximum diameter:\u003c\/strong\u003e light enough that it changes nothing about focuser load on the small refractors it is built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined aluminium, anodised:\u003c\/strong\u003e the 2023 revision moved from an aluminium casting to a machined part, and from paint to an anodised finish with a silk-screened name.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotate, then lock:\u003c\/strong\u003e turn the camera to the framing you want and lock it for the exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable with the earlier CAA (SKY90):\u003c\/strong\u003e a direct replacement in an existing train.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eFraming adjustments on FS-60 and FC-76 series refractors, the FCT-65D and the SKY90; rotating an imaging camera to align a target with the frame without loosening the rest of the train; quick reframing between targets across a session.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eTakahashi's system charts list the CAA-S (chart symbol \u003cstrong\u003e6S\u003c\/strong\u003e) as follows:\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTelescope\u003c\/th\u003e\n\u003cth\u003eHow Takahashi lists it\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFS-60CBX\u003c\/td\u003e\n\u003ctd\u003eSupplied with the optical tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFS-60CP\u003c\/td\u003e\n\u003ctd\u003eStandard accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFCT-65D\u003c\/td\u003e\n\u003ctd\u003eSupplied with the optical tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFS-60CB\u003c\/td\u003e\n\u003ctd\u003eListed in the system chart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFC-76DS \/ FC-76DP \/ FC-76DCU\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKY90\u003c\/td\u003e\n\u003ctd\u003eSuccessor to, and compatible with, the SKY90 camera rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eTakahashi US additionally lists the predecessor part for the FS-78 and FS-60C.\u003c\/p\u003e\u003cp\u003eThe figure to carry into a backfocus total is 12.3 mm. If you are adding this to a train that already has a corrector with a spacing figure to hit, send us the corrector, the spacers and the camera and we will total it through with you.\u003c\/p\u003e\u003cp\u003eIf your train is on Takahashi's larger M72 × 1.0 standard rather than M55.9, the part you want is the \u003cstrong\u003eCamera Angle Adjuster CAA-M\u003c\/strong\u003e instead — 32.0 mm light path, 90.0 × 37.0 mm, 220 g. The thread gender is reversed between the two, so they are not interchangeable with an adapter.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eGood to Know Before You Order\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo length figures, two jobs:\u003c\/strong\u003e 12.3 mm is the light path — the number that belongs in a backfocus calculation. The 20 mm outer thickness and 24.9 mm overall length describe the part physically. Use 12.3 mm for spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRotation range is not published:\u003c\/strong\u003e Takahashi describes the function — rotate the camera with it attached and lock for the exposure — without printing a degree figure or naming the clamp mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMechanical only:\u003c\/strong\u003e no optics inside. It sets angle and consumes a known 12.3 mm, and has no effect on focal length, focal ratio or field correction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is the current N version:\u003c\/strong\u003e the earlier painted-casting TKA21200 is discontinued. If you are matching an existing setup, the two are interchangeable.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs it difficult to set up?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo — it threads onto the drawtube like any M55.9 adapter, and rotation is a loosen-turn-lock motion with the camera still attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much backfocus does it use?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e12.3 mm. That is Takahashi's published light path, measured ring tip to the base of the male thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it the same as the old CAA (SKY90)?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the successor, and Takahashi lists the two as compatible and interchangeable. What changed in 2023 was the manufacturing: a machined aluminium body instead of a casting, and an anodised finish instead of paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far does it rotate?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTakahashi does not publish a degree figure. In use it turns to the framing you want and locks there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the CAA-S and the CAA-M?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thread standard. The S is M55.9 × 0.75 and consumes 12.3 mm; the M is M72 × 1.0 and consumes 32.0 mm, in a 90 mm body at 220 g. The gender is reversed between them too, so one does not substitute for the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit my telescope?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf your drawtube interface is M55.9 × 0.75, yes. Send us your telescope model and we will confirm it against Takahashi's system chart.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eBottom Line\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eAn M55.9 × 0.75 camera rotator that locks your framing in place for 12.3 mm of light path and 110 g, machined from aluminium and interchangeable with the SKY90 rotator it replaced.\u003c\/p\u003e","brand":"Takahashi","offers":[{"title":"Default Title","offer_id":54047080808559,"sku":"TAK-TKA21200N","price":215.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/TKA21200_1.jpg?v=1786913111","url":"https:\/\/ontariotelescope.com\/products\/takahashi-camera-angle-adjuster-caa-s-sky90","provider":"Ontario Telescope and Accessories","version":"1.0","type":"link"}