{"product_id":"pegasus-astro-saddle-powerbox-puck-for-ioptron-cem26-and-gem28","title":"Pegasus Astro Saddle Powerbox Puck for iOptron CEM26 and GEM28","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is the Pegasus Astro Saddle Powerbox puck for the iOptron CEM26 and GEM28. The Saddle Powerbox bolts straight onto an NYX-101 with no extra hardware; on every other mount it needs a puck cut for that mount's saddle interface, and this one covers both iOptron models.\u003c\/p\u003e\n\u003cp\u003eIt is a mechanical adapter. It carries the Saddle Powerbox — it does not add or change anything electrical.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWho It's For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a good match if you:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOwn a Saddle Powerbox and a CEM26 or GEM28\u003c\/strong\u003e and need the part that joins the two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun a portable iOptron rig\u003c\/strong\u003e where a single 12 V feed to the saddle replaces a handful of separate leads down to the tripod.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre moving a Saddle Powerbox between mounts\u003c\/strong\u003e and want a puck left permanently on each one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits two mounts:\u003c\/strong\u003e one puck covers both the iOptron CEM26 and the GEM28.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePuts the powerbox at the saddle:\u003c\/strong\u003e the Saddle Powerbox sits between the mount and the telescope, which shortens every cable run on the imaging train.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart of a mount-specific range:\u003c\/strong\u003e Pegasus Astro publishes pucks for the AM5\/AM3, NEQ6 and EQ6-R, RST-135 and RST-300, HEQ5, AZ-EQ6, Star Adventurer GTi, and Avalon M-UNO and LINEAR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical only:\u003c\/strong\u003e no electronics, no ports, no effect on the Saddle Powerbox's outputs or sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFitting a Saddle Powerbox to a CEM26 or GEM28 for on-mount power and USB distribution.\u003c\/li\u003e\n\u003cli\u003eTravel and grab-and-go setups where the whole control stack rides on the mount head.\u003c\/li\u003e\n\u003cli\u003eKeeping a dedicated puck on each mount in a multi-mount setup so the powerbox itself can move between them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires a Saddle Powerbox.\u003c\/strong\u003e The puck is the interface between that unit and your mount; on its own it does nothing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the iOptron CEM26 and GEM28.\u003c\/strong\u003e Other iOptron models are not covered by this puck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot needed on an NYX-101.\u003c\/strong\u003e The Saddle Powerbox attaches to that mount directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Saddle Powerbox itself\u003c\/strong\u003e is 110 x 110 x 32 mm, takes 12–14 V DC, and provides four 12 V outputs (10 A total), two PWM dew channels, two USB 3.1 and two USB 2 ports, and onboard temperature, humidity and dew-point sensing. Its clamp accepts Losmandy and Vixen bars and is rated to a 40 kg payload.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn a different iOptron?\u003c\/strong\u003e Tell us the model and we will check the puck range against it before you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGood to Know Before You Order\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe puck is mount-specific.\u003c\/strong\u003e This one covers the CEM26 and GEM28; the HEQ5, AZ-EQ6, NEQ6\/EQ6-R, GTi, AM5 and M-UNO versions are separate parts, all of which we stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePegasus Astro publishes no material, dimensions or weight for the pucks.\u003c\/strong\u003e Those specification rows are left out rather than filled with figures we cannot source from the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is an adapter, not a powerbox.\u003c\/strong\u003e Ordering this alone gets you the mounting interface; the Saddle Powerbox is a separate product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe powerbox adds weight above the saddle.\u003c\/strong\u003e The CEM26 and GEM28 are light-payload mounts, so it is worth counting into your total alongside the telescope and camera.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it difficult to set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The puck fixes to the mount, and the Saddle Powerbox then attaches to the puck. It is a bolt-on part with no wiring and no configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes one puck really cover both the CEM26 and the GEM28?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — Pegasus Astro publishes it as a single part for both mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my CEM40 or GEM45?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot according to Pegasus Astro's published fitment, which names the CEM26 and GEM28 only. Send us your model and we will check the range with you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it change what the Saddle Powerbox can do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Outputs, dew channels, USB ports and sensors are all unaffected — the puck only carries the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I leave the puck on the mount permanently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, and that is the usual approach when the powerbox moves between mounts.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eBottom Line\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn short: the mount-specific adapter that puts a Pegasus Astro Saddle Powerbox onto an iOptron CEM26 or GEM28. One bolt-on part covering both mounts, and your power and USB start at the saddle.\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54144389415023,"sku":"PEG-PUCK-iCEM26GEM28","price":66.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/PEG-PUCK-iCEM26GEM28.png?v=1787773226","url":"https:\/\/ontariotelescope.com\/products\/pegasus-astro-saddle-powerbox-puck-for-ioptron-cem26-and-gem28","provider":"Ontario Telescope and Accessories","version":"1.0","type":"link"}