{"product_id":"jmi-ev2-c-event-horizon-focuser-cassegrain","title":"JMI EV2-C Event Horizon Telescope Focuser - Cassegrain","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe JMI Event Horizon EV2-C is a single-speed Crayford focuser that threads onto the rear port of a Schmidt-Cassegrain telescope and gives it a second, independent focus stage. It is the grip-knob model in the Event Horizon Cassegrain line: a friction drive with rubber grip knobs, 0.565″ (14.3 mm) of travel, an 8 lb load capacity, and a 2″ drawtube with a compression ring. The body is CNC-machined and each unit is assembled and tested individually in JMI's own facility in the United States. At 1.4 lb it adds very little to what the rear cell already carries.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWho It's For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a good match if you want the mechanical benefits of a Crayford stage on an SCT — no backlash, no image shift while focusing — without paying for a dual-speed knob you would not use. A single-speed friction drive is already far finer than a rack and pinion, and the rubber grip knobs give enough feel for careful focusing by hand.\u003c\/p\u003e\n\u003cp\u003eThe 8 lb capacity is the other reason to pick this one over the EV3-C: it is the model to choose when the back of the scope carries a full imaging train, or a 2″ diagonal with a heavy wide-field eyepiece in it. If you want a 10:1 reduction for high-magnification planetary work, that is the EV1-C; if you want the focusing automated, the EVRZ and EVRP take a ZWO EAF or Pegasus FocusCube 3.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-speed friction drive:\u003c\/strong\u003e one knob, direct feel, and none of the backlash a rack-and-pinion focuser gives on reversal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber grip knobs:\u003c\/strong\u003e positive grip in the cold and with gloves on, where a bare metal knob gets slippery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.565″ (14.3 mm) of fine-focus travel:\u003c\/strong\u003e enough range to cover focus drift through a night once the mirror has set rough focus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 lb load capacity:\u003c\/strong\u003e carries a camera, filter wheel and off-axis guider, or a 2″ diagonal and a heavy wide-field eyepiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression ring:\u003c\/strong\u003e holds eyepiece and adapter barrels without marking them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard SCT rear thread:\u003c\/strong\u003e threads directly to the rear cell of Cassegrain, R-C and Maksutov telescopes that use standard SCT rear threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.4 lb focuser weight:\u003c\/strong\u003e a small addition to the back end, and it sits close to the rear cell rather than out on a lever arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined and made in the USA:\u003c\/strong\u003e individually assembled and tested in JMI's own facility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA Crayford focuser has no rack and no pinion. A polished steel drive shaft presses directly against the flat of a machined metal drawtube, and bearings on the opposite side carry the load and hold the tube square. Because the drive is a friction contact rather than meshing teeth, there is no tooth-to-tooth clearance to take up when you reverse direction — the drawtube starts moving when the knob does, and it moves along its own axis rather than tipping. That is what zero backlash and zero image shift describe in practice: a star stays on the same pixel as you rack through focus.\u003c\/p\u003e\n\u003cp\u003eOn a Schmidt-Cassegrain this matters twice over, because the telescope's own focus knob moves the primary mirror, and mirror movement is where SCT image shift and focus backlash come from. The Event Horizon threads onto the rear cell and adds a second, independent focus stage behind it. Rough focus happens once on the mirror; every critical adjustment after that happens on the Crayford, across 0.565″ (14.3 mm) of travel.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDeep-sky visual observing with heavy 2″ eyepieces, held by the compression ring rather than a set screw.\u003c\/li\u003e\n\u003cli\u003eManual focusing for imaging, on a Bahtinov mask or a live-stacked frame.\u003c\/li\u003e\n\u003cli\u003eHeavier back-end loads on an SCT — camera, filter wheel and off-axis guider together.\u003c\/li\u003e\n\u003cli\u003eAny SCT, classical Cassegrain, R-C or Maksutov where mirror-flop image shift makes precise focus tedious.\u003c\/li\u003e\n\u003cli\u003eLocking the primary mirror and doing all focusing behind it, on telescopes that have a mirror lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe base threads to the standard SCT rear port, so it fits Schmidt-Cassegrain, classical Cassegrain, Ritchey-Chrétien and Maksutov telescopes that use standard SCT rear threads. The drawtube is 2″ and holds eyepieces and camera adapters with a compression ring, so nothing gets a set-screw mark on the barrel.\u003c\/p\u003e\n\u003cp\u003eIt adds length to the imaging train. Because it sits between the rear cell and everything behind it, a visual train reaches focus comfortably, while a camera train — especially one behind an SCT reducer or a corrector with a fixed back focus figure — needs its spacing budget checked before the focuser goes on. Focal reducers and field flatteners are unaffected optically: the Event Horizon is a mechanical stage with no glass in it.\u003c\/p\u003e\n\u003cp\u003eThree optional adapters are made for the 2″ drawtube. Ontario Telescope does not stock them at the moment — if you want one alongside the focuser, send us a note and we will bring it in with the order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJMI ADPT2-1.25T combination 1.25″ eyepiece and T-thread adapter:\u003c\/strong\u003e mounts a T-threaded camera into the 2″ drawtube and doubles as a 1.25″ eyepiece adapter. Compression ring, with 48 mm filter threads on the focuser end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumicon LA1060 2″ male to SCT male adapter:\u003c\/strong\u003e drops into the 2″ drawtube and presents male SCT threads (2″ × 24 tpi) for SCT-threaded accessories such as an SCT diagonal. Includes 2″\/48 mm filter threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFarpoint FAV100 2″ to 1.25″ eyepiece adapter:\u003c\/strong\u003e a visual adapter with a non-marring compression ring, threaded for both 2″ and 1.25″ filters, with a stop that keeps long eyepieces clear of the filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/jmi-adpt2-125t-eyepiece-t-thread-adapter.png?v=1789488847\" alt=\"JMI ADPT2-1.25T combination 1.25-inch eyepiece and T-thread adapter for 2-inch Event Horizon focuser drawtubes\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/lumicon-la1060-2-inch-to-sct-male-adapter.png?v=1789488846\" alt=\"Lumicon LA1060 2-inch male to SCT male adapter for attaching SCT-threaded accessories to an Event Horizon focuser\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/farpoint-fav100-2-inch-to-125-inch-eyepiece-adapter.png?v=1789488847\" alt=\"Farpoint FAV100 2-inch focuser to 1.25-inch eyepiece adapter with non-marring compression ring for visual observing\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk us if you are not sure it fits.\u003c\/strong\u003e The one thing worth checking before you order is whether your telescope's rear port is a standard SCT thread and whether you have the back focus to spare. Tell us the telescope and what you plan to hang off the back — diagonal and eyepiece, or camera, filter wheel and off-axis guider — and we will work it out with you.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGood to Know Before You Order\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is single-speed.\u003c\/strong\u003e There is no 10:1 fine knob. For high-magnification planetary and double-star work where the last micron matters, the EV1-C adds that reduction on the same mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is a manual focuser.\u003c\/strong\u003e There is no motor and no electronics. For computer-controlled autofocus, the EVRZ (ZWO EAF) and EVRP (Pegasus FocusCube 3) versions of the same focuser are the ones to look at.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe travel is fine-focus range, not full range.\u003c\/strong\u003e 0.565″ (14.3 mm) covers critical focus and a night's thermal drift. Rough focus still happens on the telescope's own mirror knob, which is how the focuser is meant to be used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt lengthens the imaging train.\u003c\/strong\u003e It sits behind the rear cell, so a camera train with a fixed back focus figure — behind a reducer or corrector — is worth adding up before you order. Send us your setup and we will check the numbers with you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdapters are sold separately.\u003c\/strong\u003e The 2″ drawtube takes eyepieces and 2″ accessories directly; a T-threaded camera or a 1.25″ eyepiece needs one of the adapters listed above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it difficult to set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It threads onto the SCT rear port the same way a visual back does, and there is nothing to align, shim or calibrate. Set rough focus on the mirror once, then use the focuser from there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs single-speed fine for imaging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. What a camera needs from a focuser is that the drawtube move without backlash and without tilting, and the friction drive delivers that regardless of gearing. A reduction knob makes hand-focusing easier; it does not make the mechanism better.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this replace my telescope's focuser?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, it works with it. The mirror knob still sets rough focus and covers the full focal range; the Event Horizon handles the critical adjustment at the end, without moving the mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the EV2-C and the EV3-C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSame mechanism and the same 14.3 mm of travel. The EV2-C adds rubber grip knobs and is rated to 8 lb; the EV3-C is the standard model rated to 4 lb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fix mirror flop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt removes mirror movement from the focusing process, which is where most SCT focus-time image shift comes from. Mirror shift caused by slewing across the meridian is a separate matter, and a mirror lock is the tool for that.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit a Newtonian?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo — this is the Cassegrain base, which threads to an SCT rear port. JMI makes Newtonian-base versions of the Event Horizon; ask us and we will point you at the right one.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBottom Line\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn short: a single-speed friction-drive Crayford with an 8 lb capacity that puts a proper fine-focus stage behind an SCT rear cell. It brings 0.565″ (14.3 mm) of zero-backlash travel and grip knobs that stay usable in the cold, and it leaves the mirror where you set it.\u003c\/p\u003e","brand":"FarpointAstro","offers":[{"title":"Default Title","offer_id":54299391131759,"sku":"EV-2C","price":539.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/2C-1-2.jpg?v=1789489293","url":"https:\/\/ontariotelescope.com\/products\/jmi-ev2-c-event-horizon-focuser-cassegrain","provider":"Ontario Telescope and Accessories","version":"1.0","type":"link"}