{"title":"Laser Collimators","description":"\u003cp\u003eLaser collimators for fast Newtonians and Dobsonians — the quickest way to line up a primary between sessions.\u003c\/p\u003e","products":[{"product_id":"laser-collimator-with-side-view","title":"Laser collimator with side view","description":"\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003eThe Antares Laser Collimator allows you to adjust both of the telescope's mirrors with a simple, precise, two-step procedure. \u003c\/span\u003e\u003c\/span\u003e\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003eThe collimator fits 1.25\" focusers  and emits a variable red laser beam into the telescope. Tilt the secondary mirror so that the red laser dot hits the centre of the primary mirror. Then tilt the primary mirror so that the return beam hits the white plate angled at 45 degrees in the collimator's window. Adjust the mirror until the return beam lines up with the original beam. \u003c\/span\u003e\u003c\/span\u003e\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003eThat's it! \u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003eYour scope will be collimated for optimum performance with this high quality laser collimator in only one or two minutes!\u003c\/span\u003e\u003c\/span\u003e\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003eMany videos on Youtube provide excellent instruction on how to use your collimator\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"font-size: 12px; line-height: 16.200000762939453px; font-family: Arial, Helvetica, sans-serif; color: rgb(50, 50, 50);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e                   \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8G98RTP6jbY\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Antares","offers":[{"title":"Default Title","offer_id":44012304400495,"sku":"LC","price":57.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/collimator-125-laser__27510.jpg?v=1766547704"},{"product_id":"deluxe-laser-collimator","title":"Deluxe Laser Collimator","description":"\u003cp\u003eThe Starfield Deluxe Newtonian laser collimator has a long 1.25\" barrel and a machined rim for proper alignment.\u003c\/p\u003e\n\u003cp\u003eUsing the laser collimator makes correct collimating of a Newtonian\/Dobsonian telescope simple.. Collimation is completed within a very short time at the observing site in the dark, without any additional accessories being required. Precisely manufactured, it sits snugly in the focuser in the optical axis. CNC machined, the 45° angled viewing port for easier viewing from the rear of the telescope. The matte projection area allows lateral detection of the reflection and makes main mirror collimation easy - even with large telescopes.\u003c\/p\u003e\n\u003cp\u003e* Factory set, using three recessed screws located on this 1.25\" Laser Collimator's body, it is important that these settings are not adjusted or your collimator will not work as intended. Powered via three included LR44 lithium batteries.\u003c\/p\u003e","brand":"Starfield","offers":[{"title":"Default Title","offer_id":44013742456943,"sku":"SF-OC-3","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/IMG_6604__65279.jpg?v=1766561423"},{"product_id":"laser-colli-mkiii-laser-collimator","title":"Laser-Colli MkIII (laser collimator)","description":"\u003cul style=\"box-sizing: border-box; margin: 0px 0px 1em 1em; padding: 0px; list-style-position: initial; list-style-image: initial; font-family: \" open sans sans-serif rgb color:=\"\" font-size:=\"\" background-color:=\"\"\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0.5em 0px 0px 1.5em; padding: 0px; list-style: disc;\"\u003eLaser-Collimator for easy collimation of your telescope in 1-2 minutes\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0.5em 0px 0px 1.5em; padding: 0px; list-style: disc;\"\u003eHigh-quality, impact-resistant and highly accurate laser, with concealed setscrews\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0.5em 0px 0px 1.5em; padding: 0px; list-style: disc;\"\u003ePrecision-machined, hard-anodized barrel instead of the less accurate 1¼\" chrome barrel\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0.5em 0px 0px 1.5em; padding: 0px; list-style: disc;\"\u003eHandle protector made of silicone rubber facilitates handling with gloves\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0.5em 0px 0px 1.5em; padding: 0px; list-style: disc;\"\u003eSuitable for Newton and SC telescopes, instructions included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44013753073775,"sku":"LASER","price":134.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/laser-colli-mark-iii-0b4__31232.jpg?v=1766561859"},{"product_id":"farpoint-650nm-laser-collimator-combo-barrel","title":"Farpoint 650nm Laser Collimator — 1.25\"\/2\" Combo Barrel","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Farpoint 650nm Laser Collimator is the fast first step in collimating a Newtonian or Dobsonian reflector: it sets the focuser axis and brings the secondary into position in seconds, then gives the primary a quick check. This version uses a combo stepped barrel, so it seats in a 1.25\" drawtube or a 2\" one without an adapter.\u003c\/p\u003e\n\u003cp\u003eThe body is machined from a single piece of aluminum in one machining step, and the 650 nm diode is held by an eight-screw alignment system. Farpoint manufactures it in the USA and backs the alignment for the life of the tool. It ships with a mirror center-marking template, triangle center spots, and a foam-fitted carrying case.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWho It's For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a good match if you own a Newtonian or Dobsonian reflector — a solid-tube Dob, a truss or collapsible Dob, or a Newtonian astrograph on an equatorial mount — and you want a collimation check that takes seconds rather than minutes. It suits a visual observer setting up at a dark site, where the illuminated return spot reads clearly without a flashlight, and it suits an imager who wants the focuser axis squared before a session of long exposures. The combo barrel makes it a sensible single purchase if you own more than one reflector with different focuser sizes.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.76 mm (30\/1000\") beam aperture:\u003c\/strong\u003e the smallest Farpoint publishes for any collimator on the amateur market. A narrower beam speckles less and puts a tighter spot on the center mark, so the reading is easier to judge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-screw alignment system:\u003c\/strong\u003e two sets of directly opposing screws lock both ends of the laser diode, rather than the three-screw arrangement common in less expensive collimators. Holding the diode at both ends is what keeps the beam on the barrel axis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-piece machined body:\u003c\/strong\u003e the barrel and the diode housing are cut in one machining step from one piece of aluminum, which keeps them concentric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.25\"\/2\" combo stepped barrel:\u003c\/strong\u003e one tool covers both standard focuser drawtube sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected switch:\u003c\/strong\u003e positive action, shielded by an aluminum ring, so it is not switched on by a bump in a case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed anodized aluminum finish:\u003c\/strong\u003e a durable surface that stays legible under a red observing light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime alignment guarantee:\u003c\/strong\u003e Farpoint warrants the laser's alignment for the life of the tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eMechanical Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA laser collimator is only as accurate as the relationship between its beam and its barrel. If the beam leaves at an angle to the barrel axis, every adjustment it suggests is wrong by that angle — and the error is invisible, because the tool looks like it is working. Farpoint addresses this at two points. Machining the barrel and diode housing from a single aluminum blank in one step removes the stacked tolerances you get when a barrel is pressed or threaded into a separate body. The eight-screw arrangement then constrains the diode at both ends with directly opposing pairs, so it is clamped rather than pushed against a spring or a single bearing face, and it stays put when the tool is handled or dropped into a case.\u003c\/p\u003e\n\u003cp\u003eThe 0.76 mm beam aperture works on the same principle from the other direction. Laser light scattered off a mirror surface produces speckle, and a wider beam produces a larger, noisier return patch that is harder to center against the mark. Narrowing the aperture tightens the returned spot, which is what makes a small residual error visible instead of lost in the glare.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary mirror alignment:\u003c\/strong\u003e the primary job. The beam shows immediately whether the secondary is centred under the focuser and tilted correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRough primary alignment:\u003c\/strong\u003e gets the primary close before a Cheshire or autocollimator refines it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField checks in the dark:\u003c\/strong\u003e the illuminated return reads without a white light, so a check between targets does not cost you dark adaptation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter transport:\u003c\/strong\u003e a collapsible or truss Dob that has just been reassembled, or any reflector that travelled in a car, is worth checking before the first target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-imaging setup:\u003c\/strong\u003e squaring the focuser axis before an imaging run, where coma and elongated stars in the corners follow directly from a misaligned secondary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocuser fit:\u003c\/strong\u003e the stepped combo barrel seats in either a 1.25\" or a 2\" focuser drawtube. No adapter is needed for either.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelescope types:\u003c\/strong\u003e Newtonian and Dobsonian reflectors. Refractors, SCTs, Maksutovs and other catadioptric designs use different collimation methods and different tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror center mark required:\u003c\/strong\u003e a laser collimator aligns to a mark on the primary. The supplied acetate template and triangle spots cover mirrors up to 12.5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirrors over 12.5\":\u003c\/strong\u003e the LARGE center-marking template covers 12\" to 26\" and is sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with a Cheshire:\u003c\/strong\u003e a laser sets the secondary and gets the primary close; a Cheshire finishes the primary using reflected light. The Farpoint collimation kits bundle both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGood to Know Before You Order\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflectors only.\u003c\/strong\u003e This is built for Newtonian and Dobsonian optics. If you have a refractor, SCT or Maksutov, get in touch and we will point you at the right tool for it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour primary needs a center mark.\u003c\/strong\u003e The template and spots to do it are in the box, and marking a mirror is a one-time job that takes a few minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe template in the box fits mirrors up to 12.5\".\u003c\/strong\u003e Larger mirrors take the LARGE template, which we also stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA laser gets you most of the way, not all of it.\u003c\/strong\u003e For the last of the primary alignment, a Cheshire reads more precisely — which is why Farpoint sells the two together as a kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is a laser.\u003c\/strong\u003e The beam is bright by design; the usual care around not looking into it or pointing it at anyone applies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it difficult to set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It drops into the focuser like an eyepiece, and the switch turns it on. The one preparatory step is marking the centre of your primary mirror, and the template and spots for that are supplied — you do it once and the mark stays for the life of the mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich barrel size do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis one covers both. The stepped combo barrel seats in a 1.25\" drawtube or a 2\" drawtube, so it fits whichever focuser your reflector has — and both, if you own two scopes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 0.76 mm beam aperture actually change?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt tightens the spot that comes back off the mirror. A wider beam returns a larger, speckled patch that is harder to judge against the centre mark; a narrower one returns a smaller spot, so a small residual misalignment is visible rather than lost in the glare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I still need a Cheshire?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a quick check before a visual session, the laser on its own is usually enough. For the tightest primary alignment — and for imaging, where the corners show every error — a Cheshire reads more precisely. The Farpoint 2\" and 1.25\" collimation kits pair a laser with a matching Cheshire in one case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work on my SCT or refractor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo — those designs collimate differently. Send us your make and model and we will tell you what the right tool is.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from a cheaper laser collimator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree things: the single-piece machined body, the eight-screw diode mount that holds both ends of the diode, and the 0.76 mm beam aperture. All three exist to keep the beam on the barrel axis and to make the return spot readable. Farpoint backs the result with a lifetime alignment guarantee.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eBottom Line\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn short: a USA-made 650 nm laser collimator with a 1.25\"\/2\" combo barrel, a single-piece machined body and an eight-screw diode mount, for Newtonian and Dobsonian reflectors. It needs a centre-marked primary — the template is in the box — and it pairs with a Cheshire when you want the primary finished to the last fraction.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":54271558680687,"sku":"FP210","price":350.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/Product-Shot-5.jpg?v=1789136427"},{"product_id":"farpoint-650nm-laser-collimator-1-25-inch","title":"Farpoint 650nm Laser Collimator — 1.25\" Barrel","description":"\u003ch3\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Farpoint 650nm Laser Collimator with 1.25\" barrel handles the first step of Newtonian collimation: aligning the secondary mirror, then giving the primary a fast check. It is built for Newtonian and Dobsonian reflectors with standard 1.25\" focuser drawtubes.\u003c\/p\u003e\n\u003cp\u003eEvery body is machined from a single piece of aluminum in one machining step, so the barrel and the laser axis stay concentric. An eight-screw alignment system locks both ends of the 650 nm diode with two sets of directly opposing screws. Farpoint makes it in the USA and guarantees the alignment for the life of the tool. A mirror center-marking template, triangle center spots and a carrying case are included.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWho It's For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a good match if your reflector has a 1.25\" focuser — common on smaller Newtonians, tabletop Dobsonians and many imported reflectors — and you want collimation to be a thirty-second check rather than a chore. It works for a visual observer who wants to confirm alignment at the eyepiece before starting, and for an imager squaring the focuser axis before a run of long exposures. If you own a reflector with a 2\" focuser, or a mix of both, the 1.25\"\/2\" combo-barrel version covers them in one tool.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.76 mm (30\/1000\") beam aperture:\u003c\/strong\u003e the smallest Farpoint publishes for any collimator on the amateur astronomy market. Less speckling, and a tighter return spot to read against the center mark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-screw alignment system:\u003c\/strong\u003e two sets of directly opposing screws hold both ends of the laser diode, instead of the three-screw arrangement used in cheaper designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-piece machined body:\u003c\/strong\u003e barrel and diode housing cut from one aluminum blank in one machining step, which keeps them concentric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.25\" stepped barrel:\u003c\/strong\u003e seats in standard 1.25\" focuser drawtubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra-bright 650 nm red laser:\u003c\/strong\u003e readable at the focuser and on the primary without a white light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected switch:\u003c\/strong\u003e positive action, shielded by an aluminum ring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed anodized aluminum body:\u003c\/strong\u003e rugged, and easy to find by red light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime alignment guarantee:\u003c\/strong\u003e Farpoint warrants the laser's alignment for the life of the tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eMechanical Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA laser collimator's accuracy comes down to one relationship: the angle between the beam and the barrel that holds it. If the two disagree, every adjustment the tool suggests is wrong by that angle, and nothing about the tool's behaviour reveals it. Farpoint constrains this at both ends of the problem. Machining the barrel and the diode housing from one piece of aluminum in a single step eliminates the tolerance stack you inherit when a barrel is pressed or threaded into a separate body. The eight-screw mount then clamps the diode at both ends with directly opposing pairs, so it is held in compression rather than pushed against a spring or a single face — which is what keeps the alignment through handling, transport and the occasional knock.\u003c\/p\u003e\n\u003cp\u003eThe 0.76 mm aperture addresses the reading rather than the alignment. Laser light scattered from a mirror produces speckle, and a wide beam returns a large, noisy patch that is hard to centre against a mark. Narrowing the aperture tightens the returned spot so a small residual error stays visible.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary mirror alignment:\u003c\/strong\u003e the main task. The beam shows at once whether the secondary sits centred under the focuser and at the right tilt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick primary check:\u003c\/strong\u003e confirms the primary is close before a Cheshire refines it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark-site checks:\u003c\/strong\u003e the return reads by its own light, so a mid-session check costs no dark adaptation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter transport:\u003c\/strong\u003e a tabletop Dob or a Newtonian that has just come out of a car is worth checking before the first target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore an imaging run:\u003c\/strong\u003e misaligned optics show up in the corners of a long exposure as coma and elongated stars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocuser fit:\u003c\/strong\u003e 1.25\" stepped barrel, for standard 1.25\" focuser drawtubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\" focusers:\u003c\/strong\u003e this barrel does not fit a 2\" drawtube. The Farpoint 1.25\"\/2\" combo-barrel collimator covers both, and we stock it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelescope types:\u003c\/strong\u003e Newtonian and Dobsonian reflectors. Refractors, catadioptric and SCT designs collimate by other means.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror center mark required:\u003c\/strong\u003e the laser aligns to a mark on the primary. The supplied template and triangle spots cover mirrors up to 12.5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirrors over 12.5\":\u003c\/strong\u003e the LARGE center-marking template covers 12\" to 26\" and is sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with a Cheshire:\u003c\/strong\u003e the Farpoint 1.25\" Collimation Kit bundles this laser with a matching 1.25\" Cheshire in a fitted case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eGood to Know Before You Order\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflectors only.\u003c\/strong\u003e Built for Newtonian and Dobsonian optics. For a refractor, SCT or Maksutov, get in touch and we will point you at the right tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your focuser size first.\u003c\/strong\u003e This is the 1.25\" barrel. If your drawtube is 2\", the combo-barrel version is the one to order — and it fits both if you own two scopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour primary needs a center mark.\u003c\/strong\u003e The template and spots are in the box; marking a mirror is a one-time job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe supplied template fits mirrors up to 12.5\".\u003c\/strong\u003e Larger mirrors take the LARGE template, which we also stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA laser gets the primary close, a Cheshire finishes it.\u003c\/strong\u003e For visual work the laser alone is usually enough; for imaging, the pair is worth having.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is a laser.\u003c\/strong\u003e The beam is bright by design, and the usual care about not looking into it applies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it difficult to set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It drops into the focuser like an eyepiece and switches on. The one preparatory step is marking the centre of the primary mirror, and the template and spots for that come in the box — done once, the mark lasts the life of the mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my telescope?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your reflector has a 1.25\" focuser drawtube, yes. If it has a 2\" drawtube, order the combo-barrel version instead, which steps to fit either. If you are not sure which your focuser is, send us the make and model and we will check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 0.76 mm beam aperture change in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt tightens the spot that returns off the mirror. A wider beam comes back as a larger, speckled patch that is harder to judge against the centre mark; a narrow one returns a small spot, so a slight misalignment is still visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a Cheshire as well?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a quick check before visual observing, the laser on its own does the job. For the last of the primary alignment — and for imaging, where the frame corners show every error — a Cheshire reads more precisely. The Farpoint 1.25\" Collimation Kit pairs this laser with one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes it different from an inexpensive laser collimator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe single-piece machined body, the eight-screw diode mount holding both ends, and the 0.76 mm aperture. Each exists to keep the beam true to the barrel and the return spot readable, and Farpoint backs the result with a lifetime alignment guarantee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on an SCT or a refractor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo — those designs collimate differently. Tell us what you have and we will point you at the right tool for it.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eBottom Line\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn short: a USA-made 650 nm laser collimator with a 1.25\" barrel, a single-piece machined body and an eight-screw diode mount, for Newtonian and Dobsonian reflectors with 1.25\" focusers. It needs a centre-marked primary — the template is supplied — and it pairs with a Cheshire when you want the primary finished precisely.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":54271559434351,"sku":"FP211","price":237.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/ProductShotFP211.jpg?v=1789136491"}],"url":"https:\/\/ontariotelescope.com\/collections\/laser-collimators.oembed","provider":"Ontario Telescope and Accessories","version":"1.0","type":"link"}