{"title":"Farpoint Losmandy Series – SCT Dovetail Kits","description":"\u003cp\u003eFarpoint D-style (Losmandy-format) SCT dovetail plates and radius blocks machined to fit specific Celestron and Meade Schmidt-Cassegrain and RASA optical tubes. These heavy-duty bars provide a rock-solid mounting interface for larger SCTs on Losmandy-compatible saddles.\u003c\/p\u003e","products":[{"product_id":"farpoint-dovetail-plate-celestron-8-inch-sct","title":"Farpoint Dovetail Plate - Celestron 8 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Celestron 8″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Celestron 8″ SCT on any D-size (Losmandy-style) saddle — and it also fits the HD8 . The 13.5″ dovetail bar pairs with radius blocks machined to match the 8″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 8″ SCT optical tube assembly — also fits the HD8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 13.5″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 13.5″ dovetail bar, radius blocks matched to the 8″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 13.5″ D-size dovetail bar, radius blocks machined to match the Celestron 8″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. It also fits the HD8. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 8″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Celestron 8 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297406476399,"sku":"FDC8","price":158.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781721935348.jpg?v=1781721937"},{"product_id":"farpoint-dovetail-radius-block-meade-16-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 16 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 16″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 16″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 16″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 16″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Meade 16″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 16 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297410146415,"sku":"FDM16R","price":209.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781721970286.jpg?v=1781721973"},{"product_id":"farpoint-dovetail-plate-celestron-8-inch-rasa","title":"Farpoint Dovetail Plate - Celestron 8 Inch RASA","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Celestron 8″ RASA on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Celestron 8″ RASA astrograph on any D-size (Losmandy-style) saddle. The 19″ dovetail bar pairs with radius blocks machined to match the 8″ RASA tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points — a solid, stress-free foundation for the fast wide-field imaging the RASA was built for. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 8″ RASA optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 19″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 19″ dovetail bar, radius blocks matched to the 8″ RASA tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 19″ D-size dovetail bar, radius blocks machined to match the Celestron 8″ RASA tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe RASA tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 8″ RASA tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Celestron 8 Inch RASA is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297415913583,"sku":"FDC8-RASA","price":175.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722040214.jpg?v=1781722042"},{"product_id":"farpoint-dovetail-plate-celestron-9-25-inch-sct","title":"Farpoint Dovetail Plate - Celestron 9.25 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Celestron 9.25″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts 2008-and-newer Celestron 9.25″ SCTs on any D-size (Losmandy-style) saddle. The 17.25″ dovetail bar pairs with radius blocks machined to match the 9.25″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e 2008-and-newer Celestron 9.25″ SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 17.25″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 17.25″ dovetail bar, radius blocks matched to the 9.25″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit weight:\u003c\/strong\u003e 2.6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 17.25″ D-size dovetail bar, radius blocks machined to match the Celestron 9.25″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. Total kit weight is 2.6 lb. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 9.25″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Celestron 9.25 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297418174575,"sku":"FDC9.25S","price":175.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722201692.jpg?v=1781722203"},{"product_id":"farpoint-dovetail-plate-celestron-11-inch-sct","title":"Farpoint Dovetail Plate - Celestron 11 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Celestron 11″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Celestron 11″ SCT on any D-size (Losmandy-style) saddle. The 17.25″ dovetail bar pairs with radius blocks machined to match the 11″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 11″ SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 17.25″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 17.25″ dovetail bar, radius blocks matched to the 11″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 17.25″ D-size dovetail bar, radius blocks machined to match the Celestron 11″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 11″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Celestron 11 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297424924783,"sku":"FDC11","price":175.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722306554.jpg?v=1781722308"},{"product_id":"farpoint-dovetail-plate-celestron-14-inch-sct","title":"Farpoint Dovetail Plate - Celestron 14 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Celestron 14″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Celestron 14″ SCT on any D-size (Losmandy-style) saddle. The 23.75″ dovetail bar pairs with radius blocks machined to match the 14″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 14″ SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 23.75″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 23.75″ dovetail bar, radius blocks matched to the 14″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 23.75″ D-size dovetail bar, radius blocks machined to match the Celestron 14″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I get this kit or the heavy-duty C14 plate?\u003c\/strong\u003e\u003cbr\u003eThis standard kit handles visual use and general duty well. For automated imaging rigs, the heavy-duty C14 plate is 1.5″ thick — many times stiffer — which cuts vibration, settling time, and auto-guider workload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Celestron 14 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297428529263,"sku":"FDC14","price":243.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722415469.jpg?v=1781722419"},{"product_id":"farpoint-heavy-duty-dovetail-plate-celestron-14-inch-sct","title":"Farpoint Heavy-Duty Dovetail Plate - Celestron 14 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwice as thick, many times stiffer — the C-14 support bar built for serious imaging.\u003c\/p\u003e\n\u003cp\u003eThe Losmandy-style dovetail that became the standard for attaching Schmidt-Cassegrain optical tubes to German equatorial mounts was originally designed as an accessory mounting device — it was never intended to carry the full weight of a telescope the size of the C-14. With high-precision mounts, automated pointing, and unattended imaging now the norm, your support system deserves an upgrade.\u003c\/p\u003e\n\u003cp\u003eThis heavy-duty D-size support plate for the Celestron C-14 is 1.5″ thick — twice as thick as the standard — and many times stiffer, yet spacecraft-like light-weighting keeps it at only 6 pounds . The kit includes radius blocks matched to the C-14 tube. And the classic Farpoint fit, finish, and flair will make your rig the envy of your friends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron C-14 optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 1.5″ — twice the standard plate, many times stiffer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Only 6 lb, thanks to spacecraft-like light-weighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e Heavy-duty support plate and radius blocks matched to the C-14 tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the extra stiffness actually buy me?\u003c\/strong\u003e\u003cbr\u003eLess vibration — which means less wind sensitivity, shorter settling time after every pointing move, better pointing accuracy, and less work for your auto-guider. On an unattended imaging rig, those gains compound all night long.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIsn’t a 1.5″-thick plate heavy?\u003c\/strong\u003e\u003cbr\u003eSpacecraft-like light-weighting keeps it at only 6 pounds — remarkably light for a plate twice the standard thickness and many times stiffer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle. Unsure whether your saddle accommodates the 1.5″ thickness? Email us and we’ll confirm your fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Heavy-Duty Dovetail Plate - Celestron 14 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297435377775,"sku":"FDHDC14","price":514.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722534767.jpg?v=1781722536"},{"product_id":"farpoint-dovetail-plate-meade-8-inch-sct","title":"Farpoint Dovetail Plate - Meade 8 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Meade 8″ f\/10 SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Meade 8″ f\/10 SCT on any D-size (Losmandy-style) saddle. The 13.5″ dovetail bar pairs with radius blocks machined to match the 8″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 8″ f\/10 SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 13.5″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 13.5″ dovetail bar, radius blocks matched to the 8″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 13.5″ D-size dovetail bar, radius blocks machined to match the Meade 8″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 8″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Meade 8 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297438425199,"sku":"FDM8","price":158.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722663829.jpg?v=1781722665"},{"product_id":"farpoint-dovetail-plate-meade-10-inch-sct","title":"Farpoint Dovetail Plate - Meade 10 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Meade 10″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Meade 10″ SCT on any D-size (Losmandy-style) saddle. The 17.25″ dovetail bar pairs with radius blocks machined to match the 10″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 10″ SCT optical tube assembly — LX3, LX5, LX6, LX50, LX200, LX600, LX850, pre-2012 ACF OTAs, and the new ACF OTAs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 17.25″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 17.25″ dovetail bar, radius blocks matched to the 10″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Meade 10″ models does this fit?\u003c\/strong\u003e\u003cbr\u003eLX3, LX5, LX6, LX50, LX200, LX600, LX850, pre-2012 ACF OTAs, and the new ACF OTAs. Unsure about yours? Email us and we’ll confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included, and where are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe 17.25″ D-size dovetail bar, radius blocks machined to match the Meade 10″ tube, and the mounting screws. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Meade 10 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297441112175,"sku":"FDM10","price":175.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722777969.jpg?v=1781722779"},{"product_id":"farpoint-dovetail-plate-meade-f-10-14-inch-sct","title":"Farpoint Dovetail Plate - Meade f\/10 14 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Meade 14″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Meade LX200 f\/10 14″ SCT on any D-size (Losmandy-style) saddle. The 23.75″ dovetail bar pairs with radius blocks machined to match the 14″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 14″ f\/10 LX200 SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 23.75″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 23.75″ dovetail bar, radius blocks matched to the 14″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included, and where are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe 23.75″ D-size dovetail bar, radius blocks machined to match the Meade 14″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 14″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Meade f\/10 14 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297444126831,"sku":"FDM14","price":243.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781722885184.jpg?v=1781722887"},{"product_id":"farpoint-dovetail-plate-meade-lx200-f-10-12-inch-sct","title":"Farpoint Dovetail Plate - Meade LX200 f\/10 12 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Meade 12″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Meade LX200 f\/10 12″ SCT on any D-size (Losmandy-style) saddle. The 19″ dovetail bar pairs with radius blocks machined to match the 12″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 12″ f\/10 SCT optical tube assembly — LX3, LX5, LX6, LX200, LX600, LX850, pre-2012 ACF OTAs, and the new ACF f\/10 OTAs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 19″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 19″ dovetail bar, radius blocks matched to the 12″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Meade 12″ models does this fit?\u003c\/strong\u003e\u003cbr\u003eLX3, LX5, LX6, LX200, LX600, LX850, pre-2012 ACF OTAs, and the new ACF f\/10 OTAs. Unsure about yours? Email us and we'll confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included, and where are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe 19″ D-size dovetail bar, radius blocks machined to match the Meade 12″ tube, and the mounting screws. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Meade LX200 f\/10 12 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297457004655,"sku":"FDM12","price":243.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781723148235.jpg?v=1781723150"},{"product_id":"farpoint-dovetail-plate-meade-16-inch-f-10-sct","title":"Farpoint Dovetail Plate - Meade 16 Inch f\/10 SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Meade 16″ SCT on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Meade LX200 f\/10 16″ SCT on any D-size (Losmandy-style) saddle. The 23.75″ dovetail bar pairs with radius blocks machined to match the 16″ tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade LX200 16″ f\/10 SCT optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 23.75″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 23.75″ dovetail bar, radius blocks matched to the 16″ tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe 23.75″ D-size dovetail bar, radius blocks machined to match the Meade 16″ tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy radius blocks instead of bolting the bar straight on?\u003c\/strong\u003e\u003cbr\u003eThe SCT tube is round; the bar is flat. Radius blocks are machined to the exact curve of the 16″ tube so the clamping load spreads across the contact surface instead of concentrating at the bolt holes — a stiffer connection that doesn't stress the optical tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Meade 16 Inch f\/10 SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297461002351,"sku":"FDM16","price":310.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781723289994.jpg?v=1781723292"},{"product_id":"farpoint-dovetail-plate-vixen-vmc260l-ota","title":"Farpoint Dovetail Plate - Vixen VMC260L OTA","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything to put your Vixen VMC260L on a D-size saddle — bar, radius blocks, and hardware in one kit.\u003c\/p\u003e\n\u003cp\u003eThis complete kit mounts the Vixen VMC260L optical tube on any D-size (Losmandy-style) saddle. The 23.75″ dovetail bar pairs with radius blocks machined to match the VMC260L tube , spreading the clamping load across the curve of the optical tube instead of pinching it at two points. Mounting screws included; CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Vixen VMC260L optical tube assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 23.75″ — see product drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar standard:\u003c\/strong\u003e D-size (Losmandy-style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit includes:\u003c\/strong\u003e 23.75″ dovetail bar, radius blocks matched to the VMC260L tube, mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWait — a D-size bar for a Vixen telescope?\u003c\/strong\u003e\u003cbr\u003eYes — two different uses of the name. Vixen is the telescope brand that makes the VMC260L; \"Vixen-style\" is also the name of the narrow dovetail standard . This kit mounts the Vixen VMC260L tube on the wider D-size (Losmandy-style) standard — the right choice for a tube this size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included, and where are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe 23.75″ D-size dovetail bar, radius blocks machined to match the Vixen VMC260L tube, and the mounting screws — everything needed to attach the bar to your optical tube. The telescope itself is not included. The bar drawing shows the hole pattern and measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounts will this work with?\u003c\/strong\u003e\u003cbr\u003eAny mount with a D-size (Losmandy-style) saddle — Losmandy, and the many mounts that accept the wider D standard. Mount still has a small Vixen saddle? Our D-size saddles and conversions upgrade it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Plate - Vixen VMC260L OTA is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297465000047,"sku":"FDVMC260L","price":260.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781723426129.jpg?v=1781723428"},{"product_id":"farpoint-dovetail-radius-blocks-celestron-8-inch-sct","title":"Farpoint Dovetail Radius Blocks - Celestron 8 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Celestron 8″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Celestron 8″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 8″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Celestron 8″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Celestron 8″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Blocks - Celestron 8 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297465688175,"sku":"FDC8R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781723612565.jpg?v=1781723614"},{"product_id":"farpoint-dovetail-radius-block-celestron-9-25-inch-sct","title":"Farpoint Dovetail Radius Block - Celestron 9.25 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Celestron 9.25″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Celestron 9.25″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 9.25″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Celestron 9.25″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Celestron 9.25″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Celestron 9.25 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297478172783,"sku":"FDC9.25R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781724572263.jpg?v=1781724574"},{"product_id":"farpoint-dovetail-radius-block-celestron-11-inch-sct","title":"Farpoint Dovetail Radius Block - Celestron 11 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Celestron 11″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Celestron 11″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 11″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Celestron 11″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Celestron 11″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Celestron 11 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297481613423,"sku":"FDC11R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781724660822.jpg?v=1781724663"},{"product_id":"farpoint-dovetail-radius-blocks-celestron-14-inch-sct","title":"Farpoint Dovetail Radius Blocks - Celestron 14 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Celestron 14″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Celestron 14″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Celestron 14″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Celestron 14″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Celestron 14″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Blocks - Celestron 14 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297483022447,"sku":"FDC14R","price":118.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781724743780.jpg?v=1781724745"},{"product_id":"farpoint-dovetail-radius-block-meade-7-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 7 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 7″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 7″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 7″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 7″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? Browse the complete D-size kits or email us for a bar recommendation for the Meade 7″.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 7 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297485578351,"sku":"FDM7R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781724829591.jpg?v=1781724831"},{"product_id":"farpoint-dovetail-radius-block-meade-8-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 8 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 8″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 8″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 8″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 8″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Meade 8″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 8 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297487282287,"sku":"FDM8R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781724924890.jpg?v=1781724927"},{"product_id":"farpoint-dovetail-radius-block-meade-10-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 10 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 10″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 10″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 10″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 10″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Meade 10″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 10 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297488330863,"sku":"FDM10R","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781725035723.jpg?v=1781725037"},{"product_id":"farpoint-dovetail-radius-block-meade-12-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 12 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 12″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 12″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 12″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 12″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Meade 12″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 12 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297489215599,"sku":"FDM12R","price":116.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781725124930.jpg?v=1781725128"},{"product_id":"farpoint-dovetail-radius-block-meade-14-inch-sct","title":"Farpoint Dovetail Radius Block - Meade 14 Inch SCT","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlready own a D-size bar? These blocks move it to your Meade 14″ SCT.\u003c\/p\u003e\n\u003cp\u003eIf you already own a D-size (Losmandy-style) dovetail and want to move it to another scope, all you need is the proper radius blocks for the new tube. These blocks are machined to match the Meade 14″ SCT — they fit that tube only — and work with the dovetail bar you already have. CNC-machined in the USA from black anodized aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Is This Product Best For?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is designed for telescope owners and astrophotographers who use Losmandy-style (D-size) dovetail hardware. It is an ideal choice if you need a precision-machined, reliable mounting solution that integrates with the Losmandy-style (D-size) ecosystem of plates, saddles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined:\u003c\/strong\u003e CNC-machined and anodized for a tight, secure fit on Losmandy-style (D-size) hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last:\u003c\/strong\u003e Aircraft-grade aluminum construction resists flexing under load and holds alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted brand:\u003c\/strong\u003e Farpoint Astro is a respected name in telescope mounting hardware, made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this telescope dovetail plate for visual observing and astrophotography setups that rely on the Losmandy-style (D-size) dovetail standard, including mounting optical tubes, guide scopes, cameras, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Accessory Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKey compatibility and fit details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits telescope:\u003c\/strong\u003e Meade 14″ SCT only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse with:\u003c\/strong\u003e Your existing D-size (Losmandy-style) dovetail bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Losmandy-style (D-size) component and is \u003cstrong\u003enot\u003c\/strong\u003e compatible with V-size (Vixen-style) hardware unless an adapter is used. Verify your telescope's mounting pattern and your mount's saddle width before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do radius blocks do?\u003c\/strong\u003e\u003cbr\u003eThey bridge the gap between a flat dovetail bar and a round optical tube. Each set is machined to the exact curve of a specific tube, so the clamping load spreads across the contact surface instead of concentrating at the bolt holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my telescope?\u003c\/strong\u003e\u003cbr\u003eThese are machined for the Meade 14″ SCT only. If your scope is a different model or size, choose the blocks matched to your tube — or email us and we'll point you to the right set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else?\u003c\/strong\u003e\u003cbr\u003eJust your existing D-size dovetail bar — the blocks install between the bar and your optical tube. Don't own a bar yet? The complete Meade 14″ kit includes the bar, blocks, and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you run a Losmandy-style (D-size) setup, the Farpoint Dovetail Radius Block - Meade 14 Inch SCT is a dependable, precision choice that will integrate cleanly with the rest of your Farpoint dovetail system. Ontario Telescope and Accessories stocks the full Farpoint lineup to help you build a complete, matched mounting solution.\u003c\/p\u003e","brand":"Farpoint","offers":[{"title":"Default Title","offer_id":53297489641583,"sku":"FDM14R","price":116.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/0049\/6239\/files\/upload-1781725211021.jpg?v=1781725213"}],"url":"https:\/\/ontariotelescope.com\/collections\/farpoint-losmandy-series-sct-dovetail-kits.oembed","provider":"Ontario Telescope and Accessories","version":"1.0","type":"link"}